Wood Lathe Craftsman for sale

craftsman 12 x 36 wood lathe in excellent condition. Motor is 115 volt single phase hp. Included with the lathe are tailstock live center plus additional tailstock fixed center, faceplate, large and small chisel supports, 4 craftsman chisels, 4 other chisels, plus 2 headstock ...

craftsman 12 x 36 wood lathe in excellent condition. Motor is 115 volt single phase hp. Included with the lathe are tailstock live center plus additional tailstock fixed center, faceplate, large and small chisel supports, 4 Craftsman chisels, 4 other chisels, plus 2 headstock ...

Sears craftsman 12-inch wood-turning lathe with work bench cabinet on casters plus tools 4-step pulleys for different speeds New ball bearing dead center for tailstock New live center for headstock 2 tool rests 2 faceplates Pull onpush off starter button 3 calipers outside ...

sears Craftsman Wood-Turning Lathe Model Number 113.2380012 HP 1725 Sears Craftsman electric motorStill runs. Comes with original manualComes with Power Kraft lathe toolsMake offer $$

Craftsman 12 x 36 Variable Speed wood Lathe wset of 8 wood chisels.3-Gouge 14, 12, 342-Skew 1, 121-Spear Point 121-Round Nose 121-Parting Tool 18All you need is a motor and bench.Matching step pulley included. for motor

wood Lathe Craftsman 12 x 37With Faceplate for Bowl Turning 1hp875, 1,350, 2,250, 3,450 RPMIncludes tool setGood condition Asking 175 OBOIf the ad is up its still available. Please leave a phonetext number in your response.Thanks

Craftsman 12 x 36 variable Speed Wood Lathe wset of 8 wood chisels.3-Gouge 14, 12, 342-Skew 1, 121-Spear Point 121-Round Nose 121-Parting Tool 18All you need is a motor and bench.Matching step pulley included. for motor

13 hp craftsman 36wood lathe, variable speed, freestanding. Face plate and lathe tools included. If no answer, please leave message.

Craftsman wood lathe Model 113.23881 on table, 12 inch swing, inches between centers, operating instructions and parts list.

This is a older belt drive Craftsman Wood Lathe. Runs and works as it should. Older no frills machine but works good, just dont have time to use it much.

Leeson Electric Motor 110088.00 56 Frame 1 HP 1725 Rpm 1-PH 115208-230 V. And Craftsman. 4Speed Lathe as pictured. No tool rest. The motor has had little use and sells new for $240. Seven four zero 973. 29. 4.2 Text or call

Older craftsman wood lathe. Max. Stock length 31. Some tools included. Taking up much needed room in garage. Price is firm

CRAFTSMAN 8 PC WOOD WORKING HIGH SPEED STEEL LATHE CHISEL SET USA. $95 CALLS ONLY PLEASE

Craftsman Professional Lathe Wood Turning Tool. 2862$15 free shipping. Worldwide shipping available. Any questions feel free to ask. Thanks Call or Text 661 666 12sixsix

Vintage wood lathe circa 1947. Excellent condition and I believe all parts are original. Size is 8 x 24 and includes 4 inch faceplate, cup center, live center, spur center and pen turning adapter. Model 103.21600. No motor or stand.

12 inch wood lathe- CraftsmanPlus Copy Crafter - Can use with or without lathe All tools, table top, manual included not the horses - see photosSolid, good quality six one 6 9 seven.zero zero nine.nine.9

12 inch wood lathe with tools

I have a used 8in Wood Lathe Face Plate and it is still in really good shape.

Brand new with wrench, instructions all in original box. I forgot that I had this. I sold my Lathe the first of this year.

Brand new with wrench, instructions all in original box. I forgot that I had this. I sold my Lathe the first of this year.

Bed is straight. Motor runs. Bearings seem good. Cash. Will trade for HRS-21 Honda lawnmower or any 28V Milwaukee tool. Phone 6 zero 1 ate 96 3457. Leave voicemail at end of message.

Working condition.Must pick up in Adamsville. Very heavy, must bring own help to load yourself.

The JET 1220 Electronic Variable Speed Mini Lathe offers woodturners quality, portability and many features found on more expensive lathes at an economical price. The Jet Mini Lathe features cast iron construction, cam-lock levers, vibration free operation and optional bed extension make the ...

Want to trade for ATV hopefully with a snow plow, firearms, music instruments, what do you haveThis lathe probably has 6hrs of use, I was going to take classes I just never got around to it. I have a dozen or so lathe tools, and Nova Chuck Jaw Setsm, Nova 23245 SuperNova 2 Chuck with Popular ...

ShopSmith Wood Lathe, Saw Drill Press Disc Sander Multipurpose Woodworking ToolShopSmith Wood Working Wood Lathe 16, 10 Saw, Drill Press, Disc Sander, Multipurpose MachineShopSmiths can use many different attachments. Mine includes Wood Lathe 16, 10 Table Saw with cling miter ...

DELTA ROCKWELL WOOD LATHE CATALOGMODEL NUMBER 46-400 SERIAL NUMBER 135784846 INCHES FROM FACE PLATE TO END OF LATHE BED6 INCHES FROM SPINDLE CENTERLINE TO LATHE BED SURFACEAPPROX 4 INCHES GAP FACE PLATE TO LATHE BED SURFACEAPPROX 8 12 INCHES TO SPINDLE CENTERLINE IN GAP ...

DELTA ROCKWELL WOOD LATHE CATALOGMODEL NUMBER 46-400 SERIAL NUMBER 135784846 INCHES FROM FACE PLATE TO END OF LATHE BED6 INCHES FROM SPINDLE CENTERLINE TO LATHE BED SURFACEAPPROX 4 INCHES GAP FACE PLATE TO LATHE BED SURFACEAPPROX 8 12 INCHES TO SPINDLE CENTERLINE IN GAP ...

Sears Copy Crafter attachment that is added to an AMT 12 x 36 wood lathe. You will get the lathe and wooden bench on which it is mounted. There are five bundles of pre-cut wood blanks of maple or walnut for use with the Copy Crafter that will be included if you would like something ...

Sears Copy Crafter attachment that is added to a AMT 12 x 36 capacity wood lathe. You will get the lathe and wooden bench on which it is mounted. There are five bundles of pre-cut wood blanks of maple or walnut for use with the Copy Crafter that will be included if you would ...

Vintage delta wood lathe. This is a no. 930, 11-inch double duty lathe. The lathe comes with delta cast iron legs and all accessories shown in photos. Some off these accessories are hard to find. Lathe and accessories were taken apart and cleaned and inspected. This is ...

Nova 3000 16 swing- 43 bed capacity lathe with newer electronic variable speed controller. The lathe has 8 easy change belt settings and is powered by a 1 HP Leeson DC motor operating on 110 VAC and is reversible. Includes a 6 face plate, 2 MT live tailstock and 2 MT spur drive, 12 toolrest ...

For sale is a belt driven wood lathe. Delta brand. Capacity is 11 swing x 32.5 long.Included in this listing is the lathe body, headstock, tailstock, tool rest, drive center, live center, qty 2 110V motors, belt, belt tension device, face plate that mounts on either side of ...

Austrailian made Heavy duty bowl lathe 1 12 hp jet motor running on 110 v Very easy to change belt position for speed change. Was purchased from gentleman in portland who was trying to marry the jet motor inside the original steel bottom.. That was not possible so I built the table for ...

General 260V heavy duty, electronic variable speed wood lathe with 20quot riser kit. I39m the original owner and the lathe is in excellent physical and operating condition. Includes the following accessories Outboard bracket with tool rest base, allows up to 28quotdiameter ...

12 inch Sears Craftsman Wood Lathe with 5 chisels. Comes with stand its attached to that has wheels. It is in working condition. Lathe alone is 3 feet by 1 foot.You load and carry. It is HEAVY You will need at least 2-3 people and a truck. It is around 250lbs and awkward to ...

12 inch Sears Craftsman Wood Lathe with 5 chisels. Comes with stand its attached to that has wheels. It is in working condition. Lathe alone is 3 feet by 1 foot.You load and carry. It is HEAVY You will need at least 2-3 people and a truck. It is around 250lbs and awkward to ...

Wood Lathe. KF 12 x 37 with folding metal stand included. The lathe also includes 5 basic lathe turning toolschisels with various profiles. Runs good.Local pick up only on Lexington Rd.70 six - 248-447 six

General 260 Wood lathe plus everything you need to turn what you want. Several tool rest and holders for different size projects. Older Nova chuck with different size inserts. Over 50 different chisels from small to large. Vented face shield with battery powered fan. Lathe ...

I have an 11 wood lathe made by Delta Model 11-140 for Penneys with motor and accessories for sale. The headstock has new bearings installed recently. The lathe is in good working order with 4 and 12 tool rests. The tailstock has a drill chuck and key with a Morris 2 taper ...

deltahomecraft wood lathe 36centers,11swing, 12 hp motor lathe only if you want the band saw i do have another one but not sure about a motor price will change with band saw best to call or text me..that would be the band saw if you want it the motor has been removed not sure ...

WHAT YOU HAVE A CHANCE TO BUY IS A GREAT KLEIN DESIGN 12 INCH WOOD LATHE IN GREAT, WORKIING CONDITION. THIS LATHE HAS A GREAT BASE AND SWITCH THAT HAVE BEEN ADDED FOR EASIER USE. EVERYTHING WORKS AS IT SHOULD AND IT HAS ALL OF THE ADJUSTMENT PIECES ALTHOUGH THERE ARE NO CHISELS. ...

Craftsman wood lathe in good condition. Swing 12, distance between centers 38. Four speeds from 875 to 3450 rpm. Motor - 13 hp, 110 volts. Comes with eight turning tools that are sharp and in good condition. Also with a complete selection of work holding centers and an eight ...

Wood Lathe, 20 electronic variable speed image 1 of 7General Wood Lathe model 26020 with Electronic Variable Speed, 0 to 2900 RPM, Swing over bed 20, 38 between centers, 1 14 x 8 tpi headstock spindle. Good for turning large pieces with exacting speed control at an affordable ...

I have this wood lathe that I just dont use. Would make a good starter lathe

This vintage 9 x 48 wood lathe is in excellent condition and runs great. The lathe is mounted on a heavy duty stand that includes 2 wooden shelves. The bed, tailstock, and banjo are all H A brand originals, but the headstock has been replaced with a Delta at some point in ...

Duro wood lathe with motor and stand. Lathe works and includes a set of risers and extra tool rest.

For sale is a J LINE wood lathe in great shape. This lathe is a beast and work perfect and comes with turning tools. The taile stock is included but not in photo. Only asking 400.00. Please CALL no texts. Three three zero four seven two zero two zero two. Thanks

Rockwell Delta 12 deluxe variable speed wood lathe. Model 46-200. Works great lathe with extras

Craftsman 12in Wood Lathe

12 in craftsman wood lathe. Works great , i have no use for it. Asking 200 obo

Wood lathe set

Wood lathe set includes 1 wood lathe, 6 long handled tools and 3 wood chucks. Pick up Longview only With five adjustable speeds, this bench top wood lathe tackles a wide variety wood turning projects. The lathe handles workpieces up to 10 in. in diameter and 18 in. long. ...