Rear Axle for sale

Used Dana 70 rear Axle Assembly for 1986 Ford Motor-home Chassis. This is a 3.54 Ratio according to the tag and BOM sted numbers. It appears to be the Super 70 version with the 1SU code on the housing. This designates the axles to be a 37 Spline Shafts, which is the highest ...

Up for sale is this complete rear Dana 44 rubicon spec axle. This came as an extra with the Rubicon that I bought to rebuild for myself. My understanding is that the guy I got my Jeep from ordered a complete front axle for it from California. Someone screwed up and they ...

I have for sale a rear axle assembly for 95-02 Toyota Tacoma 2.4l 2WD Gear Ratio 3.58. There is one axle that will need a new bearing pressed in and the third member will need a new seal due to draining differential. The third member is in good working condition. This comes ...

Rear Axle from a 1991 Toyota land Cruiser 80 Series. good condition with no issues. Coils, Shocks, Arms and brake lines not included. Lots of other FJ80 parts and 3FE engine parts. Text for inquiries. ThanksText preferred 661666-12sixsixOpen to all offers and Trades. Thanks4 ...

Numbers on it are B I do clean up jobs all over and ran into the old looking rear axle 10 bolt GM did some research on it says 1955-1964 car rear axle, 411, GM 8.2 inch, 10 bolts on the front cover drop out style, has coil springs, or could be 1955 to 1964 GM rear end differential ...

This is a complete 9 Ford rear axle housing and third member. This assembly was removed from a stock 1957 F-100 pickup truck. It is complete from brake drum to brake drum and includes the axles, brakes and leaf springs. Total width axle face to axle face is 161 12.This item ...

Numbers on it are B I do clean up jobs all over and ran into the old looking rear axle 10 bolt GM did some research on it says 1955-1964 car rear axle, 411, GM 8.2 inch, 10 bolts on the front cover drop out style, has coil springs, or could be 1955 to 1964 GM rear end differential ...

... LT24575R16E on-off-road blackwall on 4WD Models rear axle 3.73 ratio Requires 34 ton Models. Upgradeable to GT5 Rear axle 4.10 ratio. Suspension rear multi-stage leaf springs Requires 34 ton Models Trailering equipment heavy-duty includes trailering hitch platform 7-lead wiring connector auxiliary...

Please use contact info provided below, NOT email or CL messaging. I rarely check the email associated with my CL account. You will not get a response.Dana RA15 heavy truck rear axle, stock 4.30 ratio unverified, open diff, set up for leaf spring suspension, 8-lug pattern. ...

This is a heavy duty rear end out of a late 70s International 2 ton Brush fire truck. I bought it for the Dana 70 front axle and have no need for this rear axle. Gears are 6.67 and is a 10 lug pattern. I can send more pictures and I can load. $500 or best offer.

Rear axle from 2006 Buick Rainier. Fits Chevy Trailblazer, GMC Envoy, Buick Rainier, Isuzu Ascender, Saab 9-7X. 180k miles. New axle seals and bearings installed recently. 342, G80 locker. Air ride pump and actuators available. Air bags are not. Good newer coil springs available. ...

I have a solid industries rockcrusher high pinion Dana 44 rear axle , it has Dutchman cromo shafts, 4.10 gears, Detroit locker, 8.8 disk brakes. I also have a new set of 4.56 gears and a spare set of axles . Axle was built for a jeep cj7, 5x5.5 lug pattern, 56 wheel to wheel ...

Very good rear axle. dont know the gear ratio. you are welcome to check the rear axle out. WILL GO TO SCRAPE YARD NOV. 16th

Have a good used Mustang rear differential axle out of a 1994 mustang V6 car. Good condition. Its a 5 lug setup for disc brakes. Brake system not available. Changed complete axle for a different ratio. Should work in all 1994-1998 mustangs. Maybe others. 7.5 ring gear. 2.73 ...

2007 GM 14 bolt full floater complete rear axle assembly , 410 gears , limited slip , disc brakes. Axle was removed from a running driving truck that was parted out for the engine transmission, no noise or issues. Spring perches were removed , but will include a new pair ...

2F2Z4B435ABFord oem replacement If your Windstar has a rusty rear axle this is what you needFactory upgrade replacement so your axle doesnt break in half Some Windstars got a repair kit which was two brackets on the existing axleThis is the upgrade that was installed instead ...

I have a Dana 60 rear axle from a 2000 Dodge Ram 2500 V8. Will fit any V8 Dodge Ram 2500 00-02 2nd gen. Has 179k miles and is 4.10 gear ratio with limited slip. Gears look good and axle housingbacking plates are in good shape not rotted.$200 comes complete drum to drumLocated ...

Rear axle from a 1949 Chevy 3800 truck. 8 lug drums and wheels roll freely. Have additional parts from same vintage trucks steering columns and boxes, complete cylinder head, wheels, even a 1 12 ton, 4400 series, 10 lug duelie rear axle available.

Dorman pn - 630-151 rear axle shaft for Chevy and GMC vans and trucks with 8 lugs. 2 available in original boxes - Brand New and includes the axle bearing, oil seal, wheel studs, and wheel nut. $160.00 Each.

New Ten Factory Dana 35 Non C-Clip Rear Axle Kit - MG22133. Missing bearing and seal for 1 axle, the other one has i

Mopar 8 34 rear axle housing with NEW alloy axle shafts with Green bearings that fits Dodge and Plymouth A body cars Dart, Demon, Duster, Valiant, Sc. $950.Also have available open and Sure Grip 3rd members in all ratios and 10 or 11 brakes.CALL 9o9-7 two 5- 7 two llref mopar, ...

Rear axle assembly from a 2003 dodge cargo van with disc brakes and rear springs. only 39K miles on unit. Would also make a good trailer axle. $75 or make offer. Call or text Charlie

Rear Axle from a 1991 Toyota Land Cruiser 80 Series. good condition with no issues.Coils, Shocks, Arms and brake lines not included.Lots of other FJ80 parts and 3FE engine partsOpen to all offers and Trades of all kinds. Thankstext preferred 661666-12sixsixStraight Axle, Toyota ...

I have a 1971-1974 B-body plymouthdodge 8 34 rear axle housingassembly. came from a 1972 charger, so has the small locator hole in the spring perches. comes with axle shafts, backing plates, brakes and drums. NO center chunk, but i do have center sections for sale separate. ...

I have a 1971-1974 B-body plymouthdodge 8 34 rear axle housingassembly. came from a 1972 charger, so has the small locator hole in the spring perches. comes with axle shafts, backing plates, brakes and drums. NO center chunk, but i do have center sections for sale separate. ...

97 98 99 00 01 02parting out.rear differential diff axle 8 lug rear disc brake wheel axle $140spare rims, tires tire, dash, condenser, frame, body and a few other things...Engine, trans, hood, bumpers sold has no doors.

This is a rear full-floating rear axle out of a 2000 Ford E-350.412,000 miles, but in excellent shape.3.55 gears, open diff, single rear wheel49.5 center-to-center spring pad widthComplete new bearings in differential about 2 years ago, so zero pinion slop or gear noiseNo leaks ...

GM 14 Bolt Full Floating Rear Axle single rear wheel with 3.73 gears. Exact fit for 73-87 ChevyGMC Trucks, K5 BlazerJimmy and Suburban. This is a very desirable Axle Ratio and very hard to find in a Full Floater most were 4.10. Cover was removed to check gears, everything looks ...

GM 14 Bolt Full Floating Rear Axle single rear wheel with 3.73 gears. Exact fit for 73-87 ChevyGMC Trucks, K5 BlazerJimmy and Suburban. This is a very desirable Axle Ratio and very hard to find in a Full Floater most were 4.10. Cover was removed to check gears, everything looks ...

No E-mails please.........Good complete rear axle from a 2006 gmc yukon 2 wheel drive with 3.23 gears code GU5 and G80 factory locker. this axle has speed sensors for the traction control feature. $250.00 firm

No E-mails please.........Good complete rear axle from a 2006 gmc yukon 2 wheel drive with 3.23 gears code GU5 and G80 factory locker. this axle has speed sensors for the traction control feature. $250.00 firm

For sale are two axle shafts that will fit a 1993-1996 Chevy Caprice with the 7.625 rear axle.They are both in good condition, having been pulled from a vehicle with only 103,000 miles.Asking $75 for one, or $125 for both.

I have a 2003 2WD Dodge Ram 1500, 3.55 ratio, disc brake rear axle for sale. This new axle has 2200 actual miles on it. It came out of a truck that had been in long term storage that had a engine fire. Asking $190 .

1948-52 Ford F1 rear end complete drum to drum plus axle and springs. Front axle is available too, drum to drum, shock mounts, springs, pitman arm $150.00

Rear axle housing off of a 1987 Samurai. It is a good straight un-cut, un- modified axle housing. Inside is not rusty. May need a good cleaning but has always been stored in doors.Only issue is one corner one backing plate mount is ground off.Asking $5 or make me an offer.

Rear axle housing off of a 1987 Samurai. It is a good straight un-cut, un- modified axle housing. Inside is not rusty. May need a good cleaning but has always been stored in doors.Only issue is one corner one backing plate mount is ground off.Asking $5 or make me an offer.

A good Dana 35 off my Jeep Wrangler. I believe it has 373 gears but would need to remove the cover to confirm. The axle is complete and ready to drop into your Jeep.I dis an axle swap and dont need it anymore. Email or text Kevin at 360.391.three49three

I have a 2003 2WD Dodge Ram 1500, 3.55 ratio, disc brake rear axle for sale. This new axle has 2200 actual miles on it. It came out of a truck that had been in long term storage that had a engine fire. Asking $190 .

I have a Rear Axle out of a 1994 Ford F150, it is a 355 Limited Slip axle code H9, has drums included.Take $150Call or Text

Rear axle out of 1985 chev van. Complete with springs. $75.00 Also have 1976 AMC Pacer 3-speed trans. $75.oo. Have 1955 Chev 235 engine bare block. $75.00.Standard bell housing, flywheel and clutch for same $45.00. Have granny gear 4-speed trans. for it. $50.00. Two old pu ...

Rear axle out of a 2003 Dodge Ram. Rear axle needs differential bearings replaced$100

A good used low mileage rear axle for a 3500. Part 68275062AE

Case 543317 non posi-traction rear axle with 8 lug aluminum drums. 3.23 ratio, old school race rear axleCall or text 334-791-500 three.No shipping, no trades

1968-1972 chevrolet chevelle brand new cra6803s rear axle brake lines still in the original package asking $30.00

Rear axle assembly from 1956 Dodge car, two pumpkins, 3.54 4.78, disassembled complete brake drum to brake drum

1974 Ford Bronco Rear Axle, Ford 9 inch 3.50 gears

... only, no texts. Can deliver if needed maybe a fee

Dana 60 rear axle removed from a ford van disc brakes and 4.10 gear ratio $175 John No text or emails returned

08 Yukon Denali Rear Axle Assembly in good working condition will fit these vehicles07-14 Cadillac Escalade07-14 Chevy GMC suburban 07-14 Chevy Tahoe07-14 GMC Yukon

2005 f250 rear axle complete l3 axle code 3.73 ratio

good axle, came off a low miles southern truck, l3 axle code, all complete